 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| This document was generated on 06/04/2010 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: Status: Overview: Description: 1120080008 Active eNetMeter DN diagnostic tool for DeviceNet General Product Family Series Approvals Comments Communication Speed IP Rating Overview Product Name Type Field Attachable / Accessories 112008 ODVA, UL, CUL, CE eNetMeter DN; monitors approx. 9,500 parameters 10 / 100 Mbaud (Auto), 125, 250, 500 Kbaud IP20 enetmeter_dn DeviceNet* eNetMeter EU RoHS China RoHS ELV and RoHS Compliant REACH SVHC Not Reviewed Halogen-Free Status Not Reviewed Need more information on product environmental compliance? Email productcompliance@molex.com For a multiple part number RoHS Certificate of Compliance, click here Please visit the Contact Us section for any non-product compliance questions. Physical Cable Diameter Coupling Type Diagnostics / LEDs Diagnostics Port Gender Keyway Material - Connector Body Material - Contact Material - Coupling Nut Material - Plating Mating Orientation Poles Temperature Range - Operating Wire Size AWG N/A N/A Yes Yes N/A N/A N/A N/A N/A n/a N/A N/A 0C to +60C N/A Search Parts in this Series 112008Series Electrical Current - Maximum per Contact Voltage - Maximum N/A 11-25V DC Material Info Old Part Number SST-ENM-DN1 Reference - Drawing Numbers Sales Drawing E-112008-0008 This document was generated on 06/04/2010 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Continuously monitor a DeviceNetTM network; measure, analyze and record network parameters to minimize network downtime. eNetMeterTM for DeviceNet Diagnostic tool Features * Continuously monitors a DeviceNet network in a passive state * Provides feedback to an EtherNet/IPTM master or one of three methods to a personal computer (PC) residing on Ethernet NetAlytixTM software DLL interface OPC server * High-speed sampling of network parameters Signals are sampled millions of times per second providing extremely accurate values Information captured includes: Overall network status and measurements Individual node status and measurements Detailed measurements of power (V+, V-), signal (CANH, CANL) and shield parameters Common mode voltage for entire network and each node Minimum / maximum and average values * Overview BradCommunicationsTM eNetMeterTM DN is a passive device that continuously monitors a DeviceNet network and sends the information over Ethernet to a PLC or PC monitoring system. The information can be read directly by an EtherNet/IPTM master. Optionally, data can be accessed through TM BradCommunications NetAlytix software, a DLL interface or an OPC server. * Warning and Fault flags indicate when a value has exceeded a set tolerance (levels are customizable) NetAlytix software enables fast device setup or USB port allows configuration without a PC Compact design with DIN rail or panel mount option for quick and easy installation * * eNetMeter DN provides extremely accurate measurements of the network parameters using high-speed sampling. By comparing acceptable baseline measurements of a "good" network, it can predict imminent failures down to individual devices. Measurements can be used in such a way, that when an OPC status tag is analyzed and is found to be outside the acceptable limits, steps can be taken to repair the system prior to any downtime. eNetMeter DN can be used to diagnose current faults on a non-functioning network through the measurement of hundreds of network parameters. This can minimize downtime by pinpointing the node or location of the fault. The data can also be stored to historian software for future analysis. This is useful for companies typically involved with batching applications including pharmaceutical, food & beverage. If a problem occurs with a specific batch, the historical data can be viewed to see if any network problems occurred during the same time frame. This allows the company to then make any necessary adjustments to prevent reoccurrences from happening in the future. eNetMeterTM for DeviceNet Software Tools Specifications Hardware: Diagnostic LEDs & Control Operating Temperature Storage Temperature Humidity RoHS Compliant Approvals Enclosure Ready, System/Boot, Power & Comm; Reset (recessed) 0 to 60C -5 to 75C 5% to 95% non-condensing Yes CE, cULus (pending) IP10 DIN rail or panel (screw) mounted USB 2.0 master, for transfer/storage of configuration parameters Typical Good CAN Waveform* Mounting USB Network Specifications: Protocols Cable Connector DeviceNet Power Isolation DeviceNet, EtherNet/IP for reading data DeviceNet: compatible with target network Ethernet: Cat 5e shielded Ethernet : RJ45 ; DeviceNet : 5-pole M12 Micro-Change(R) Auxiliary power : screw terminal M12 Micro-Change 5-pole threaded connector - 11 to 25 VDC, 250 mA (typical @ 24 VDC) 500 V DeviceNet: 125K, 250K and 500K baud; Ethernet: 10/100 M baud NetAlytix CAN H/L Data Summary Indicating No Problems TM Data Rate Ordering Information SAP Material Number 1120080008 1120080011 Catalog Number SST-ENM-DN1 SST-NAS-DN1 TM Product Description eNetMeter DN diagnostic tool for DeviceNet NetAlytix software for eNetMeter DN (includes full application, DLL/API, OPC Server) TM NetAlytix Lite software is included with eNetMeter DN to allow setting of the IP address, parameter configuration, and other basic commissioning tasks. Dimensions : mm [inches] Typical CAN Frame Distortion with CAN H Shorted to Floating Shield* NetAlytix CAN H/L Data Summary Indicating Fall-time is out of tolerance (Yellow Warning State) * Signal captures were obtained using a digital storage oscilloscope on a typical DeviceNet network. To contact us: www.woodhead.com Reference Number: DW2008250 Date Published: September 2008 North America: US: + 1 800 225 7724 - Canada: +1 519 725 5136 Europe: France: +33 2 32 96 04 20 - Germany: +49 7252 94 96 0- Italy: +39 010 59 30 77 - United: Kingdom +44 1495 356300 Asia: Shanghai, China: +86 21-5835-9885 - Tianjin, China: +86 22-23321717 Singapore: +65 6268-6868 - Yamato, Japan: +81 46-265-2428 - Nagoya, Japan: +81 52-221-5950 Brad and Micro-Change are registered trademarks and BradCommunications, eNetMeter and NetAlytix are trademarks of Molex Incorporated. (c) 2008 Molex |
Price & Availability of 1120080008
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |